Lisomar Rechargeable Wall Sconce (Set of 2)

Lisomar, a rotating wood wall light

Lisomar is a slim bar of solid wood with rounded edges and a white diffuser along one face. Each bar is CNC milled and finished by hand so the natural grain shows. It sits on a ball mount and rotates 360 degrees, which lets you set it level or on a slant and aim the light across the wall. Each light is cordless and powered by its own rechargeable battery. A USB cable charges it. Touch the bar or use the included remote to turn it on and change the light color. The set has two lights, so you can put one on each side of a bed.

Where to put it

Use one on each side of the bed instead of two table lamps, or one flanking each side of a dressing mirror in a bedroom. On a hallway or landing wall with no outlet, it gives you light without a cord to run. In a living room, angle the bar to light the wall behind a sofa. It is made for indoor use.

• Type: rechargeable LED wall sconce with a light bar that rotates 360 degrees, set of 2
• Sizes: about 8.7 in (22 cm) by 2.8 in (7 cm) by 2.0 in (5.1 cm), each light
• Base: rotating ball mount
• Material: solid wood, CNC milled and hand finished, with natural grain
• Color temperature: white light or colored RGB light
• Control: touch control on the bar and the included remote; a long press turns it on or off, a short press changes the light color
• Power: rechargeable battery
• Charging: USB cable
• Mounting: base fixes to the wall with adhesive, screws or a self-adhesive iron disc, or attaches by magnet straight to an iron surface
• Use: indoor
• In the box: two lights and a remote control

Each Lisomar light is a wood bar on a base, and the base is the part that fixes to the wall. It runs on its battery, so there is no wiring.

What you need: A USB cable for charging, and adhesive, screws or a self-adhesive iron disc for each base.

1. Charge each light bar before you put it up.
2. Fix each base where you want it, using the adhesive, screws or iron disc you chose.
3. Check that the light bar sits firmly on its base.
4. Turn the bar on its ball mount until it points where you want the light.
5. Long press the power touch point on the bar to switch it on, or use the remote.

Good to know

• To charge the light, remove the light bar from its base and plug a USB cable into it. The base stays on the wall.
• On an iron surface, the mount can attach by magnet, with no adhesive or screws.

• It is wireless and battery powered, so you can still put a light on a hallway or bedroom wall that has no outlet.
• The bar turns 360 degrees on its mount, so in a living room you can set it level or tilt it and point the light where you want it.
• The set has two lights, a matching pair with one for either side of the bed.
• Touch the bar to turn it on or change the light color, or do it from the sofa with the included remote.
• It is made of solid wood with natural grain, CNC milled and finished by hand, and puts a natural material on a hallway or home office wall.